F-5700 N.O. 3-Way Pressure Piloted Valve

English

CAD model selection

Selectable products: 24

HELP_VARIABLE


Company	Air Logic
Description	F-5700 N.O. 3-Way Pressure Piloted Valve
Bill of material	F570015PTB85
PREVIEW Preview
PRODUCT_ID Product ID	F570015PTB85 F570015PTB85
MANUFACTURER_PART_NUMBER Manufacturer Part Number	F570015PTB85 F570015PTB85
PRODUCT_NAME Product Name	F-5700 N.O. 3-Way Pressure Piloted Valve - F570015PTB85 F-5700 N.O. 3-Way Pressure Piloted Valve - F570015PTB85
PRODUCT_LONG_DESCRIPTION Product Long Description	Pressure piloted 3 Way Valves apply signal pressure to a diaphragm that is opposed by a spring force. When then pressure signal force is greater than the spring force it reaches its set-point (also called “On” pressure), the internal mechanism moves and changes the pneumatic state The signal pressure and pneumatic circuit are completely isolated from each other The pneumatic circuit is normally open, which means the supply port is open to the output port When the switch trips, the supply is shut off and the output port is vented through the exhaust to atmosphere. There is no connection available on the exhaust port. The switch will remain in this state until the pressure signal drops below its reset point (also called “Off” pressure) The difference between the “On” pressure and the “Off” pressure is defined as the Differential or Hysteresis of the valve Factory preset options are available. Please contact your salesperson or distributor for specifications and a custom part number Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will raise the Set point. Counter clockwise adjustments will lower the setpoint (on pressure). Adjusting preset 3-way valves is not recommended. Do not back out the flat head screw above flush with the body
PART_NUMBER_DESCRIPTION Part Number Description	Pipe Thread Mount 1/8-27 NPT N.O. 3-Way Pressure Piloted Valve 15 PSI Pipe Thread Mount 1/8-27 NPT N.O. 3-Way Pressure Piloted Valve 15 PSI
VALVE_OPERATION valve operation	Normally Open - Senses Pressure/Turns Output OFF
PORT_TYPE port type	Barb for 1/8" I.D. Tubing Barb for 1/8" I.D. Tubing
PRESSURE_RANGE pressure range	1.5 bar - 8 bar
SENSING_RANGE sensing range	0.5 to 15 PSI 0.5 to 15 PSI
NOMINAL_ORIFICE_SIZE nominal orifice size	2 mm
MOUNTING_TYPE mounting type	Pipe Thread Mount 1/8-27 NPT Pipe Thread Mount 1/8-27 NPT
INCH_METRIC inch metric	Inch
FITTINGS fittings	4 mm Push to Connect
AIR_CONSUMPTION_AT_6_BAR air consumption at 6 bar	.7 l/min
WETTED_MATERIAL wetted material	Buna and Nylon
TYPE type	F-5700
BARB barb	1/8" 1/8"

No Third-party Cookies supported

F570015PTB85